Mr H - LP-1 T Bars

(click for a larger image)

Mr H LP-1 T45 (Luke Painter 1) T Bar Handle Bars Both full custom and handmade individually in the UK and prototyped with Luke Painter the Mr H. LP-1 T Bars are the strongest bar you can possible buy. Once you buy these, you will never need another set of bars!

100% Function , So they wont colour match your scooter but good luck breaking them!

Currently available in 21" x 18" at £79.99 or custom spec is also available on request.

T45 - T45 steel is made in the UK by Corus, it is a high grade of Carbon-Manganese mild steel with a very high tensile strength and fatigue resistance. It has a minimum of 17% elongation, this means that it will (under extreme circumstances) bend not break when eventually, overloaded. These properties make T45 a particularly suitable material for scooter handlebars.

It is used throughout the aerospace and motorsport industry as chassis and and safety cell, also in roll cages and suspension components. The land speed record car Thrust II used a space-frame chassis and safety cell made from T45 steel when it took the world record at 633mph!

Brazing - Brazing is used in many industries, it can be seen in the highest quality mountain bike and BMX frames and is also popular in racecar chassis including the the Aerial Atom and Caterham 7.

The steel is heated using an oxygen/acetylene gas torch and a brass alloy filler rod to make the joint. The steel is heated to 800-900 degrees C allowing the brass to melt and flow into the joint, joining both pieces of steel together.

Brazing makes a very strong joint that unlike welding, never actually melts the parent material (steel) this leaves its crystalline structure unchanged and therefore stronger with greater crack resistance.

Price: £ 79.99
Shipping: £5.00

(click for a larger image)

[Return to Micro Scooter Handle Bars] [Return to Mr H]